How to Capture a Menu List using SnagIt
Hello Friends,
Today I have an interesting Tip and Trick for Snagit Users. If you own Snagit and do not know how to capture a menu list read on.
If you have never heard of this software SnagIt is the best screen capture software you can find in the market. Once you start using it you will wonder how you managed without it! Its like mobile phones 
, how did we ever survive without them?? How did we ever survive without Snagit??
Snagit has five different capture modes and over 40 different ways to capture, no wonder, SnagIt outrules them all!
To start off, I’m going to ask you, “Do you know how to capture a menu/ dropdown list with your screen capture software?”
If your answer is “No”. Well, there can be two reasons why you picked that answer:
1. Your software doesn’t have the capability to do so.
Solution: Try SnagIt
2. You are using SnagIt but you have no idea how to do it.
Solution: Use the Time Delayed Capture.
How to Use the Time Delayed Capture
Open Snagit and select the Profile Mode you would like to use to Perform you Capture e.g region, scrolling mode etc. : (See image below)
Click on the ‘Capture’ menu (you find this on the top left of your snagit screen) and then select ‘Timer Setup…’ you get the screen below.
On the Timer Setup window shown above check the box for ‘Enable delayed/ Scheduled Capture
Select the Delayed Capture radio button and Set a time delay on the Delay field between 1 and 60 seconds.
Check the Display Countdown checkbox to see the countdown appear on the lower right-hand corner of your screen. Click Apply and OK.
Now you’re ready to capture your menu/dropdown list.
NOTE: Just make sure you have the Menu/Dropdown selected before the countdown ends. Once the countdown ends, wait for the capture box to appear and select your desired capture area.
Example:
Now its your turn give it a try and share your comments below on your first experience performing a ‘Delayed Capture’ using Snagit.
You are now a few steps closer to becoming a Certified SnagIt Expert 
.
I look forward to seeing your comments.
Peter – Your Snagit Guide
How to use Xara Xtreme’s Bevel Tool
Hello Friends,
Time for another Tutorial!
We are going to teach you how use the Bevel Tool of Xara Xtreme 5.0. Don’t belittle this tool as it can transform a simple object into a professional-looking work of art.
At the end of this article, we will show some images made possible by the power of Bevel Tool.
To start off, create your desired object it could be anything, you can choose from the Tools menu located on the left-hand side of the Xara Xtreme’s work area. (Text, Shape, Free-hand, etc) Once you’re done, click on the Bevel Tool from the tool menu on the side, then from the drop-down menu on top, click on the arrow to see all types of bevel, choose your desired type.
Apart from the Drop-down menu, you may also adjust the bevel depth, contrast, light angle and light elevation. For example, to adjust the contrast of the bevel, make sure it is set to “Contrast” and then toggle from slider or enter your desired percentage.
IMAGE You can control the bevel depth and the light angle in two ways apart from doing it manually, you may also use the red arrows by dragging them to your preferred depth and the black arrows to the direction where you want the sun light to create an effect on the object.
There are also other tools on the Bevel Menu, like the buttons for creating an effect to your bevel to appear outside or inside the object. You may also change the color of the bevel by selecting the bevel and choose your desired color from the color palette located on the bottom of the Xara Xtreme’s work area.
Another tool allows the shape of your bevels to be either mitered, round or beveled.
The examples used above are for demonstration purposes only, thus, I am encouraging you to create a better and artistic outputs from this bevel tutorial.
See below some work of art made out of the Bevel Tool by Groucho see more here….
See more from Fusion Bevel outputs here…..
If you’re not a Xara Xtreme owner yet you can purchase and download Xara Xtreme right away!
This is enough to give you some inspiration! Now, you’re all set and I hope that this tutorial brings out the Xara bevel side of you!
Until Next Time
Peter – Your Xara Guide
How to Capture Snagit using Snagit
Hi Friends,
Do you own Snagit? If yes then this is a must read because 99% of Snagit users don’t know the answer to my question “How do you Capture a Snagit Screen using Snagit”?.
If you have never heard of Snagit this is a software thats a ” MUST HAVE”, its the most popular selling software at Softwarecasa. Mainly because its one of the most useful software besides an antivirus that anyone could ever purchase, you will use it daily! Once you start using Snagit you will wonder how you managed without it.
Snagit is a screen recording software that Captures, edits, and helps you share exactly what you see on your screen with others within seconds!
Softwarecasa has a 30 day money back guarantee on Snagit so you can purchase it today and if you are not happy with its performance you will get a full refund provided its within the 30 days.
Now back to the millions of Snagit funs…
A common question that most Snagit users don’t have an answer to is how to capture a Snagit Screen using Snagit! We receive alot of support emails with this question, I must admit the first time I got the question I was dumbfounded myself, but not for long.
This is an actual example of an email we got from a Snagit user:
“I am trying to create in-house step by step instructions on how to perform video capture using SNAGIT. I am trying to capture SNAGIT’s home page w/Quick Launch, Related Tasks, Profiles, and Profiles Settings. But when I use Printscreen it activates SNAGIT. I’ve also tried to use Ctrl Insert, Ctrl A, Ctrl C to capture the screen but to no avail. Is there some way that I can get around the Print Screen hotkey and get my screen capture? I would appreciate feedback as soon as possible…thank you and have a nice holiday…” - Kathy
There are two ways in capturing a Snagit Screen using Snagit:
A. Hide Snagit before capturing
1.Launch Snagit.
2.Go to Tools menu.
3.Click Program Preferences…
4.Go to Program Options tab.
5.Uncheck Hide Snagit before capturing.
6.Click Apply button.
7.Then OK.
B. Change Global Capture Hotkeys
1.Go to Program Preferences…
2.Click Hotkeys tab.
3.On the Global capture hotkey, by default it is set to Print Screen, change it to a different key except Print Screen.
4.Click Apply button.
5.Then OK.
How to capture Snagit using Print Screen
When performing a capture using the alternative steps, just press the Print Screen button on your keyboard > open Snagit Editor > create a new blank image (Ctrl + n)> then paste the image (Ctrl + v).
The Print Screen function normally captures the entire screen display, you will have to crop the image to get the desired image from the captured image.
That easy!
Until Next Time
Peter – Your Software Guide
-
About
Here you will find, tricks, tutorials, and maybe secrets on how to use your favorite softwares
Email Updates
